Friday, July 30, 2010

Using a Gutter Rake to Clean Gutters.

What Is a Gutter Rake?

A gutter rake tool specifically designed to make cleaning leaves, pine needles, twigs and other debris out of gutters easier and faster than other methods. Invented by a home maintenance contractor, it fits the most common sizes of gutters and will easy go under or over any support braces that are inside the gutters.

The head on gutter rakes are unique and make all the difference to using a pole or other similarly shaped tool. The straight end is used to pull the debris toward you while the curved part pushes it under the braces or struts. Because the head is tilted and angled back, it is able to easily get at what is in the gutters and “scoop” it along as you move the gutter rake.



The rake head is attached to a pole, around 5 feet long, so you can reach quite a bit of gutter on either side of you without moving your ladder. Usually they have a threaded end so you can attach them to a longer extension pole increasing the length of the tool for areas that are hard to reach or to quickly clean very long gutter sections.

When not attached to an extension pole, gutter rakes generally only weigh about a pound, which makes them lightweight and pretty easy to maneuver and control. They are not hard to manage as you stand on a ladder to clean out the gutters.

How to Use a Gutter Cleaning Rake
A gutter rake is simple to use. First you need to place your ladder on level ground so it is stable. Either position an A-frame ladder close to the gutters or use an extension ladder you can lean directly against the house, which will probably be more secure.

Then start pulling the debris through the gutter toward you so you can easily remove it. You can either attach a bucket or garbage bag to your ladder to collect the debris as you pull it out or you can throw it on the ground and clean it up later. Once you have cleaned out all of the gutters you can reach from where you are, you will need to move the ladder to the middle of another section of gutter to clean that area out again. As you work, you will be able to quickly figure out the best
places to put your ladder to most efficiently clean the gutters.

When to Use a Gutter Rake
Most gutters need to be cleaned out at least twice a year, usually in the spring and fall. However, if you live under a lot of trees that drop pine needles and leaves, you may need to clean them more frequently, maybe 3-4 times annually.

A gutter rake works best when the gutters are not completely crammed with debris, about half full or less. The debris can be either wet or dry, but the rake will be best for leaves and other lightweight materials.


Gutter rakes are great tools


A gutter rake can save you a lot of time when it comes to clean your gutters. You will have to go up and down your latter is much either. With a gutter rake and an extension pole put together, you can reach 15 feet on either side of the latter. This makes gutter cleaning a snap. To use a gutter rake simply put your latter up next to a downspout. Make sure that the area in front of the downspout is cleared out first. Then user gutter rake to clean out up to 15 feet on either side of the downspout. Pull everything towards you and loaded into a 5 gallon bucket. When you have finished cleaning out the area or when your bucket is completely full, take it down and throw it in the yard waste container. Using a gutter rake has helped me to cut down on the time it takes me to clean my gutters by as much as 50%.



Looking for a Portland Gutter Cleaning Service?